These EASY DIY photo magnets are so simple that even a kid can make them! Give these glass magnets as photo gifts, use them as party favors, or keep the kids busy during summer break.
Skills Required: Beginner. If you can cut out paper with scissors, you can make these photo magnets! The time required to make these is minimal, and you can make a lot of these picture magnets at once. You don’t have to worry about any wrinkles in this project.

Are you ready, my friends, to make the easiest craft project you’ve ever made in your life? Then you’re ready for these DIY picture magnets! I’ve made clothespin magnets and bottlecap magnets, but not the glass marble type.
It took me forever to finally try making DIY glass magnets like these, and I thought it would be the perfect time to try while looking for a quick craft idea. Making fridge magnets is pretty quick and I can’t believe I haven’t tried the glass version before.
The analogy is living in Seattle and never going to the Space Needle. It’s always seemed too obvious, so I’ve never done it.
I hope you will forgive me, because I think the picture I’m about to show you of myself will make up for everything. It’s a picture I used it in this photo craft:

Yep, it’s me. I shaved my head when I was 22 years old. My hair was long, past my shoulders, and I had a boyfriend at that time who didn’t know I shaved my head until he came over to my house and saw it. Yipes (he didn’t mind).
Why did I do it, you ask? After having long hair for my whole (adult) life, I wanted to know what it felt like to have short hair.
I wasn’t sure how to cut it, so I shaved it off – and didn’t fully realize what happened until the hair was on the ground. I guess doing wild stuff is the fun part of being a young girl. But I digress . . .
DIY Photo Magnets
These photo magnets are easy to make (they’re a great craft for teens or adults), but I do have a few tips and commonly asked questions I wanted to address before we jump into the tutorial.
I originally published this tutorial in 2011 and since then, this is what people want to know. You can read this section or continue to scroll for the how-to.
Type of Beads/Marbles
For these picture magnets you’re going to be looking for “flat backed” beads or marbles (they might also be called glass gems or accent pebbles). They are commonly used in floral displays I’ve found.
The flat back is so that you can glue a magnet to the back, so that part is important! Also you want something that you can see through (even if it’s not clear). The marbles you select for your glass bead magnets should be transparent.

Where to Buy Them
For these picture magnets, I got a 1-lb. bag of glass beads at Dollar Tree. I don’t know if they are always there – but I know that the craft store has them in the floral section.
In addition, I found them on Amazon and also on Wish (which is good if you want a large quantity for favors). MAKE SURE they have flat backs on one side!
Personalization Ideas
You can use photos to personalize your DIY glass magnets, however, I do recommend making laserjet copies of the real photos so you don’t get any bleed.
Photos are cute for handmade gifts or wedding favors. But you don’t *have* to use photos; you can use anything. The idea is to pick a scrap of something (the magnets will end up being about 1″ or so) that has meaning to you or to the recipient.

Paper, Fabric, and More
You can use a variety of materials on the back of the magnets: scrapbook paper, tissue paper, printed patterns (go for laserjet), fabric, wrapping paper, foil, maps, cardstock, rice paper, and more.
You can paint on the back too. For example, you could put some Sparkle Mod Podge on the back of the marble, let dry, and then paint. Your DIY glass magnets can be anything you want them to be!
Mod Podge Formula to Use with Glass Magnets
Because glass is shiny, I pretty much always use Mod Podge Gloss when glass is my surface. It’s just a personal preference, and you can use any formula you like to be honest.
The only formula I wouldn’t recommend using is Dimensional Magic. Dimensional Magic is meant to provide a 3-D effect on top of surfaces, not to adhere. Stick with Gloss, Matte, or Satin (but other formulas work too).
Are you ready to see how the glass magnets were made?? Keep reading!
Gather These Supplies
- Computer and printer/scanner
- Photos to scan
- Mod Podge Gloss
- Scrapbook paper scraps
- Glass beads – my 1 lb. bag is from Dollar Tree
- Magnets
- Hot glue gun
- Pencil or pen
- Paintbrush
I wanted to commemorate the shaved head times as well as my pug Roxie, both when she was young and now. Here are the pictures I chose:

If you use regular photos, scan them in and print them out (preferably on laserjet). I will say that if you have an HP printer, it uses a dry ink, so you’re probably safe. You can also let the print outs dry overnight and then seal them with hair spray both sides. This prevents ink from bleeding.
Use photo software (like PicMonkey) to crop out part of the photo (a simple circle shaped crop), then I printed a few copies in different sizes to see what would work for my glass marbles.
You can cut out just the head shapes – I wanted floating heads on the back of the glass magnets, because that is more funny. Set the heads aside.

The glass marbles are not completely round, so trace them onto your scrapbook paper pieces and then cut out the shapes just inside the lines.
This is a great scrap buster project, by the way – it takes just a small amount of excess paper to make them!

Use your Mod Podge to adhere the face (right side down on the flat side of the marble); use a thin layer or it’s never going to dry. Smooth it with your fingers and allow to dry for 15 – 20 minutes.

Adhere the scrapbook paper (right side down) on to the marble, allow to dry overnight and then hot glue to the magnets to the back. Don’t you love my cordless hot glue gun with a headlight?

Here are the finished custom photo magnets. They make such a great end of summer craft to capture summer memories or fun photos. What about a teacher gift idea or back to school? The possibilities are endless.

I’d love to see you try these DIY picture magnets and let me know how they turn out in the comments!
Photo Magnets
Equipment
- Computer and printer/scanner
- Pen or pencil
Materials
- Photos to scan
- Mod Podge Gloss
- Scrapbook paper scraps
- 12 Flat glass beads also called marbles
- Magnets
Video
Instructions
- Use photo editing software to size your images to fit your glass marbles; print out using a laserjet or dry ink printer.
- Cut out your photo shapes and set aside.
- The glass marbles are not completely round, so trace them onto your scrapbook paper pieces and then cut out the shapes just inside the lines.
- Use Mod Podge to adhere the face (right side down on the marble). Smooth and allow to dry for 15 – 20 minutes.
- Adhere the scrapbook paper (right side down) on to the marble, allow to dry overnight.
- Hot glue to the magnets to the back to finish.
Want some additional easy budget project ideas? Check out these other posts:


Thanks everyone!
Debbie, these are pretty strong – it’s a balance of the magnets not being to strong and the hot glue. It seems to work okay for now. But E6000 is AWESOME! That’s a great idea.
Judy G – the magnets are from Michaels. You can probably get them at nearly any craft store.
xo to all
I love that little Flip Pal! And, I want to see the before, before picure, too–the one with the long hair! 😉
OMG, looking through my stash this is awesome and your Roxie is so cute!
I’ll be keeping my fingers crossed on the Flip-Pal scanner, it’s on my wish list though.
My next project this weekend before this is to Mod Podge dress up my cane. It’s been here and there and needs some sprucing up!
🙂 Lori m
Totally AWESOME! I hope one day I will have a Flip Pal!
Thanks for blogging about the scanner. I bought one and it is great. Light weight and easy to use. I haven’t used it for any craft projects yet, but have scanned some old photos.
What a great idea! You could do a whole family tree to put on the fridge for your kids to become acquainted with!
Using the punch is the easiest way! How cool would it be to make some for a grandparent for Valentines. Or letters/numbers for your grandchild…
Piggie is a cutie! Love this easy peasy project. But I think you shoud give a way one of those rocking cordless glue guns! LOL Portable hot glue I Love IT!
that scanner should be renamed to something more awesome… 🙂
Hey! I shaved my head too! Well, because I didn’t want the cancer to take ti away..but it gave me a whole new perspective on “hair”!
Glad to have mine back..and love the puggie too!