Skip to Content

DIY Wall Vase Makes a Pretty Floral Display

Display fresh flowers and herbs in your home this summer with an easy-to-make DIY wall vase using a recycled bottle.

Skills Required: Beginner. It helps to have some basic crafting experience for this project. You’ll be Mod Podging, cutting wood, using wood screws, and cutting metal trim.

Display fresh flowers and herbs in your home this summer with an easy-to-make wall vase using a recycled bottle.

Hello friends!

Does it finally feel like summer at your house too? One of my favorite things about summer is having fresh flowers in my yard. I am totally not an expert grower, but I do have a few plants that seem to bloom beautifully all summer long.

Since I am always looking at lovely ways to display them inside the house, I thought I would share this simple DIY flower wall vase tutorial with you! It’s a pretty DIY home decor craft that I think you’re going to enjoy making. It’s really easy!

modpodgevase02

DIY Wall Vase

Gather These Supplies

If you can’t find an old bottle, a vintage inspired soda bottle would work great too! The metal trim I found at Hobby Lobby, and I noticed a lot of craft stores are now selling something similar in the craft section.

modpodgevase031

To get started on your DIY wall vase, cut the wood scrap into a 6″ x 8″ piece. Then trim your paper to fit on top, and ink the edges just to give it an old distressed look.

modpodgevase041

Next, coat both your paper and wood with Mod Podge, and seal them together. Apply an additional thin coat on the top of your paper. If you plan to put your vase outdoors, add a couple of extra coats.

modpodgevase051

Otherwise, one coat should be plenty.

modpodgevase061

After your Mod Podge is dry, center your glass bottle on the wood board, and measure how much trim you need. The metal trim I found cuts easily with scissors, but you may need pliers depending on how thick it is.

modpodgevase071

Next, take your screwdriver, and attach the metal trim with one screw on each side. Make sure you pull the trim really tight so the bottle does not move.

If you are nervous that the bottle might slip out, just add a little glue on the back side of the glass.

modpodgevase081

Your bottle should fit snugly inside when done. If you need to add water to the vase, carefully pour it inside using a funnel.

That’s it! so easy. This DIY vase looks lovely on a table, but can easily be hung on a wall too. Just pick up some frame hardware for the backside of the wood.

Display fresh flowers and herbs in your home this summer with an easy-to-make wall vase using a recycled bottle.

I have a lovely lavender plant in my backyard, and we have been rotating freshly cut lavender for the last few weeks It smells sooooo good!

Yield: 1 vase

Wall Vase

Display fresh flowers and herbs in your home this summer with an easy-to-make wall vase using a recycled bottle.

Learn how to make a DIY wall vase with a scrap of wood and an old bottle! This is such a simple idea.

Prep Time 30 minutes
Active Time 1 hour
Total Time 1 hour 30 minutes
Difficulty Easy
Estimated Cost $10

Materials

  • Scrap of wood
  • Glass bottle
  • Mod Podge Matte
  • Scrapbook paper
  • Ink
  • Screws - 2
  • Metal trim - enough to go around the bottle

Tools

  • Paintbrush
  • Screwdriver

Instructions

  1. Cut the wood scrap into a 6" x 8" piece.
  2. Trim the paper to fit on top, and ink the edges just to give it an old distressed look.
  3. Coat both the paper and wood with Mod Podge, and seal them together. Apply an additional thin coat on the top of the paper. Let dry.
  4. Center the glass bottle on the wood board. Measure the amount of trim needed; cut with scissors or pliers.
  5. Take the screwdriver and attach the metal trim with one screw on each side. Make sure to pull the trim very tight so the bottle does not move.
  6. To hang on the wall, add frame hardware to the back of the vase.

Did You Make This Project?

Please leave a rating or share a photo on Pinterest!

I have my DIY wall vase hanging right in side my front door entrance, so it’s easy to spot and smell right when you walk in my front door.

Goodness, I have so much lavender blooming right now, I may just have to make a few of these wall vases for neighbors too!


Happy summer friends. I hope you are enjoying sunshine, cool breezes, and home grown flowers too! Before you go, don’t forget to check out these other ideas:

Cynthia

Wednesday 1st of July 2015

Love this! Great idea! You could use a soda can for the metal strap. I add texture to the can with my cuttlebug. Could also make a patchwork of textured soda cans for background. Ideas are endless.

Skip to Instructions